FS-3000E Cảm biến lửa

FS-3000E Cảm biến lửa

  • 5.481.960 vnd
  • Liên hệ
  • Takex/ Japan
  • 12 Months
  • High sensitivity, ultraviolet (UV) light, ceiling mount / wall mount (BCW-401), 10m detection range, 120o sweep angle, adjustable, NO / NC switch, Alkalin or Lithium battery 10-30VDC, 4 levels of sensitivity, built-in speakers in 4 languages, memory, anti-cut.
Hướng dẫn sử dụng

GENERAL DESCRIPTION
Flame sensor FS-3000E quickly detects ultraviolet rays contained in flames and activates the built in message speaker.

CONVENIENT INSTALLATION BY BATTERY
FS-3000E can be powered from either type-3 alkaline battery or optional lithium battery.

EXTERNAL OUTPUT TO A SECURITY SYSTEM
FS-3000E does not only output a warning message but also outputs a form A (N/O) external output. It can be connected to a control panel which enables operation of other security equipments as a security system.

4 SELECTABLE LANGUAGES
The voice message can be selected among 4 languages. The speaker volume can be adjusted by the volume switch on the back.

OTHER FUNCTIONS
･ Compact design enables FS-3000E to be installed at any location. Easy separation of the sensor unit from the base simplifies installation and maintenance.
･ The LED flashes (lights approx. 0.1 sec / approx. 5 secs.) to annunciate low battery condition.
･ When power is turned on, 3 alarm sounds are activated. If no alarm sound is activated, check the power source.

OPERATION SET- UP BY DETECTION TIMER
The alarm will be activated only when the sensor detects a flame (ultraviolet ray) in accordance with the detection timer.
The 4 following detection times are selectable by the mode selector on the sensor body.
〈0.2 secs., 1 sec., 6 secs., 30 secs.,〉

 Model  FS-3000E
 Product name  Flame Sensor With Speaker
 Detection system  Ultraviolet rays detection. (Detected wave length <185 to 260nm>)
 Detection distance  10m (3ft) [7cm (2.75") flame]
 Detection angle  Approx. 120゜(conically)
 Sensitivity adjustment  Detection timer (0.2secs., 1sec., 6secs., 30secs.)
 Power supply  ･ Type-3 alkaline battery (LR6) × 2(3V) … accessory
 ･ Exclusive lithium battery (CR17450E-R-2-CM2) × 1(3V) … optional
 Power consumption  Stand by: 70μA or less
 Operate: 300mA or less (at max. volume of speaker activating)
 Battery life  Using type-3 alkaline battery … approx. 2 years (at stand by)
 Using exclusive lithium battery … approx. 5 years (at stand by)
 LED  Indication : Red LED
 Alarm : Flash during message output
 Low battery : Light on 0.1 sec. every approx. 5 secs.
 Warning message output  Operation : Output warning message when detecting flames.
 Message selection : 4 options (*English *Spanish *French *Italian)
 Volume : Mute - max. approx. 80dB (3.3ft. <1m> from the front of speaker.)
 External output  NPN open collector output
 30V (DC) 50mA, one-shot operation ("ON" when outputting)
 Output time : Same as message output time.
 Wiring  Terminals
 Ambient temp. range  14F to 140F (-10C to +60C) without condensation
 Battery performance may decrease under 32F(0C)or beyond 104F(40C)
 Installation  Indoor (Ceiling or wall mount)
 Weight  approx. 8.1oz (230g) including battery(accessory) 1.8oz (50g)
 Appearance  ABS resin (white)
 Accessories  Tapping screw Φ4×25 2 pcs.
 Sensor locking screw Φ3×6 1 piece
 Exclusive battery case of Type-3×2 1 piece
 Type-3 alkaline battery LR6×2

 

Related Product
smoking
sensor lighting hanseung
Takex